Eventuri

Eventuri Audi RS7 C8 Carbon Fibre Intake System

€3.295,00 EUR

Sale Sold out

Taxes included. Shipping calculated at checkout.

Finish Gloss Matte

Purpose-built for the tightly packaged C8 engine bay, the Eventuri Carbon Fibre Intake System for the RS7 tackles a genuinely difficult engineering problem: limited hood clearance restricts both internal airbox volume and inlet geometry more than on almost any other Audi platform. Eventuri's answer was a completely new airbox architecture - maximising usable internal space, enlarging inlet openings, and optimising filter angle for a more direct path to the twin turbos.

The turbo inlet openings themselves are increased by up to 85% in cross-sectional area, addressing one of the most critical restriction points in the entire intake tract. A custom rounded panel filter keeps the airflow path free of sharp corners for genuinely smooth delivery. The results, independently tested at multiple stages: 15-25hp and 11-20ft-lb on stock ECU, climbing to 45-50hp and 40-45ft-lb at Stage 1 (with 100-200km/h acceleration reduced by 0.6 seconds), and 60-80hp and 60-70ft-lb at Stage 2 - the stock airbox becomes an increasingly bigger bottleneck as tuning level rises, so this intake scales with your build rather than plateauing.

Works with: Stock ECU through Stage 1/2 tunes - gains scale with tuning level as the factory airbox becomes more restrictive under higher boost demand.

Why Choose This Intake System

Completely redesigned airbox - maximised volume, enlarged flow entry, optimised filter angle
Turbo inlets up to 85% larger in cross-section - addresses the biggest restriction point in the stock tract
Custom rounded panel filter - no sharp corners in the airflow path for genuinely smooth delivery
Independently dyno and drag strip tested - verified gains from stock through Stage 2
Gains scale with tuning level - 15-25hp stock, up to 80hp at Stage 2
Gloss or matte prepreg carbon fibre finish