{"title":"RS6 C8 (2019-2025)","description":null,"products":[{"product_id":"eventuri-audi-rs6-c8-carbon-fibre-intake-system","title":"Eventuri Audi RS6 C8 Carbon Fibre Intake System","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003ePurpose-built for the tightly packaged C8 engine bay, the Eventuri Carbon Fibre Intake System for the RS6 tackles a genuinely difficult engineering problem: limited hood clearance restricts both internal airbox volume and inlet geometry more than on almost any other Audi platform. Eventuri's answer was a completely new airbox architecture - maximising usable internal space, enlarging inlet openings, and optimising filter angle for a more direct path to the twin turbos.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eThe turbo inlet openings themselves are increased by up to \u003cstrong\u003e85%\u003c\/strong\u003e in cross-sectional area, addressing one of the most critical restriction points in the entire intake tract. A custom rounded panel filter keeps the airflow path free of sharp corners for genuinely smooth delivery. The results, independently tested at multiple stages: \u003cstrong\u003e15-25hp and 11-20ft-lb on stock ECU\u003c\/strong\u003e, climbing to \u003cstrong\u003e45-50hp and 40-45ft-lb at Stage 1\u003c\/strong\u003e (with 100-200km\/h acceleration reduced by 0.6 seconds), and \u003cstrong\u003e60-80hp and 60-70ft-lb at Stage 2\u003c\/strong\u003e - the stock airbox becomes an increasingly bigger bottleneck as tuning level rises, so this intake scales with your build rather than plateauing.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e\u003cstrong\u003eWorks with:\u003c\/strong\u003e Stock ECU through Stage 1\/2 tunes - gains scale with tuning level as the factory airbox becomes more restrictive under higher boost demand.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eWhy Choose This Intake System\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eCompletely redesigned airbox\u003c\/strong\u003e - maximised volume, enlarged flow entry, optimised filter angle\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eTurbo inlets up to 85% larger in cross-section\u003c\/strong\u003e - addresses the biggest restriction point in the stock tract\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eCustom rounded panel filter\u003c\/strong\u003e - no sharp corners in the airflow path for genuinely smooth delivery\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eIndependently dyno and drag strip tested\u003c\/strong\u003e - verified gains from stock through Stage 2\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eGains scale with tuning level\u003c\/strong\u003e - 15-25hp stock, up to 80hp at Stage 2\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003cstrong\u003eGloss or matte prepreg carbon fibre finish\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eAudi RS6 Avant (C8, 4.0 TFSI)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCarbon fibre airbox base\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCarbon fibre airbox lid\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eBespoke BMC panel filter\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eEnlarged turbo inlets with CNC-machined reinforcement\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCustom silicone hoses with OEM-spec clamps\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCustom hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eventuri","offers":[{"title":"Gloss","offer_id":54212991385933,"sku":"EVE-C8RS6-CF-INT","price":3295.0,"currency_code":"EUR","in_stock":true},{"title":"Matte","offer_id":54212991418701,"sku":"EVE-C8RS6-CFM-INT","price":3295.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/eventuri-audi-rs6-c8-carbon-fibre-intake-system.webp?v=1784798325"},{"product_id":"kw-audi-rs6-c8-avant-2019-height-adjustable-lowering-spring-kit","title":"KW Audi RS6 C8 Avant 2019+ Height Adjustable Lowering Spring Kit","description":"\u003cdiv class=\"collateral-box\"\u003e\u003c\/div\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eGet the best of both worlds with KW's Height Adjustable Lowering Springs - combining the benefits of a lowering spring with the precision of a coilover, letting you dial in your RS6 Avant's ride height exactly rather than committing to a single fixed drop. Lowering the centre of gravity sharpens handling, lifts driving dynamics, and gives the car a more sporting character on the road.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eThe full adjustment range is TÜV-approved in Germany, so you get genuine flexibility within a range that's been officially tested and signed off, not just a guideline. Threaded columns are made from galvanised steel for long-term durability, and the kit arrives complete and ready to install, with full documentation included for straightforward use and, where applicable, road-legal registration.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e\u003cstrong\u003eWorks with:\u003c\/strong\u003e Factory dampers only - front and rear springs are both height adjustable. Not compatible with air suspension.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eWhy Choose This Spring Kit\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eIndependently adjustable ride height\u003c\/strong\u003e - dial in your exact drop rather than a fixed setting\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eTÜV-approved adjustment range\u003c\/strong\u003e - officially tested, not just a manufacturer estimate\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eComplete, ready-to-install set\u003c\/strong\u003e - front and rear springs included\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eGalvanised steel threaded columns\u003c\/strong\u003e - built for long-term durability\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eFull documentation included\u003c\/strong\u003e - supports easy use and registration where required\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eWorks exclusively with factory dampers\u003c\/strong\u003e - no need to replace your OEM suspension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eAudi RS6 Avant C8 (2019+) - factory damper equipped models only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eLowering Range\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eFront:\u003c\/strong\u003e 5-30mm\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eRear:\u003c\/strong\u003e 5-30mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eFront axle springs (height adjustable)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eRear axle springs (height adjustable)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003ePart code: 253100CZ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"KW","offers":[{"title":"Default Title","offer_id":54212991942989,"sku":"253100CZ","price":1086.19,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/kw-audi-rs6-c8-avant-2019-height-adjustable-lowering-spring-kit.jpg?v=1784796520"},{"product_id":"csf-audi-rs6-rs7-c8-radiators-intercooler-set","title":"CSF Audi RS6\/RS7 (C8) Radiators Intercooler Set","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eThe 4.0L twin-turbo V8 in the C8 RS6 and RS7 starts to experience genuinely debilitating heat soak and progressively increasing intake air temperatures on the OEM intercoolers, which forces the ECU to pull engine timing and drastically decrease power output. Documented dyno testing shows the OEM intercoolers already starting to lose ground by the third consecutive pull, with intake air temperatures climbing steadily as engine speed increases.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eDeveloped through CSF's strategic partnership with PWR, this intercooler set uses a genuine Formula-1 grade core unlike anything else available in the performance aftermarket. Where the OEM core uses 22 tubes at 7mm tube height and 7mm fin height, CSF's design nearly doubles that with 45 tubes at just 3mm tube height and a 4.85mm multi-louvered fin, a fundamentally different approach that increases pressure drop slightly but dramatically increases heat rejection potential. The same dyno graphs that showed OEM heat soak by the third pull show the CSF-equipped car's temperature actually dropping as engine speed increases, with very quick recovery between pulls, on both a stock tune and a Stage 2-tuned car. CNC-machined billet aluminium end tanks, 100% TIG-welded, replace the OEM's crimped cast aluminium end tanks and gasket design, a genuine strength and durability upgrade ready for increased boost from performance tunes or upgraded turbochargers. Independent dyno testing recorded gains of \u003cstrong\u003e20whp\/18wtq on a Stage 1 tune\u003c\/strong\u003e and \u003cstrong\u003e10whp\/20wtq on a Stage 2 tune\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e\u003cstrong\u003eWorks with:\u003c\/strong\u003e Factory mounting points and hoses. True drop-in fit, no cutting or modifications required, no aftermarket shrouds or hoses needed.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eWhy Choose This Intercooler Set\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eFormula-1 grade PWR core, 45 tubes at 3mm height versus the OEM's 22 tubes at 7mm\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e100% TIG-welded billet aluminium end tanks, eliminating the OEM's failure-prone crimped and gasketed design\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eProven dyno gains, 20whp\/18wtq on Stage 1, 10whp\/20wtq on Stage 2\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eGenuinely faster heat soak recovery between hard pulls, shown directly in back-to-back dyno testing\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eTrue plug-and-play drop-in fit, uses all factory mounting points, hoses, and shrouds\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eShares the same proven core design used on CSF's Porsche 992 Turbo\/S and 991 GT2 RS intercoolers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eAudi RS6 Avant (C8, 4.0 TFSI)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eAudi RS7 Sportback (C8, 4.0 TFSI)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eFinish Options\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eRaw billet (CSF #8194)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCustom finishes available on request\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CSF","offers":[{"title":"Raw","offer_id":54445102334285,"sku":"CSF-8194","price":4440.0,"currency_code":"EUR","in_stock":true},{"title":"Thermal Dispersion Black","offer_id":54445102367053,"sku":"CSF-8194B","price":4765.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/csf-audi-rs6-rs7-c8-radiators-intercooler-set.webp?v=1785680349"},{"product_id":"do88-audi-rs6-rs7-c8-intercooler-set-mera","title":"do88 Audi RS6\/RS7 C8 Intercooler Set MERA","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eThe already efficient twin intercooler system on the dual-turbo V8 RS6\/RS7 is refined even further with do88's MERA kit. Engineered as a direct OE replacement, it features high-quality \u003cstrong\u003e105mm cores supplied by Garrett Motorsport\u003c\/strong\u003e, using advanced aerospace technology, densely packed, thin cooling fins offering genuinely efficient heat transfer, with airflow distributed evenly across the core via do88's freeform cast end tanks.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eThe main challenge in designing a performance intercooler for the RS6\/RS7 is the limited available space behind the front bumper and wheel arches, restricting core, tank, and ambient airflow size. do88 used every available millimetre of that space: a \u003cstrong\u003e50% larger core volume\u003c\/strong\u003e (10,063cm³ versus 6,689cm³ OEM), \u003cstrong\u003e29% larger active cooling area\u003c\/strong\u003e (958cm² versus 743cm²), and larger 70mm machined hose connections, a \u003cstrong\u003e37% increase\u003c\/strong\u003e over the OEM's 60mm, a step do88 identifies as one no other manufacturer has taken on this platform. Independent testing confirmed a \u003cstrong\u003e27°C lower inlet air temperature\u003c\/strong\u003e under identical conditions, and \u003cstrong\u003e16% higher airflow\u003c\/strong\u003e at 0.125 bar\/1.81psi pressure drop (422 CFM versus 363 CFM stock). Custom-designed carbon fibre ambient air guides are included to make the most of available airflow. Regardless of whether your car is at standard boost or heavily tuned, this kit dramatically improves on the OE intercooler.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e\u003cstrong\u003eWorks with:\u003c\/strong\u003e OEM mounting points. Direct OE replacement fitment.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"mt-2 -mb-1 text-base font-bold\"\u003eWhy Choose This Intercooler MERA\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eBuilt around genuine Garrett Motorsport Bar \u0026amp; Plate cores, validated independently by Garrett using do88's own 900hp RS6 test data\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e50% larger core volume, 29% larger active cooling area than OEM\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e37% larger hose connections (70mm vs 60mm OEM), a step do88 says no competitor has taken on this platform\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e27°C lower inlet air temperature, independently tested under identical conditions\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e16% higher airflow than OEM\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCustom carbon fibre ambient air guides included\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eDramatically improves performance whether stock boost or heavily tuned\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"mt-2 -mb-1 text-base font-bold\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eAudi RS6 Avant (C8, 4.0 TFSI V8, 2020+)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eAudi RS7 Sportback (C8, 4.0 TFSI V8, 2020+)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"do88","offers":[{"title":"Default Title","offer_id":54495095783757,"sku":"ICM-500","price":4753.67,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/do88-audi-rs6-rs7-c8-intercooler-set-mera.webp?v=1786455591"},{"product_id":"do88-audi-rs6-rs7-c8-intake-system","title":"do88 Audi RS6\/RS7 C8 Intake System","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eFiltration, airflow, and heat are the key considerations when designing a new intake system for a turbocharged engine. A turbocharged engine performs best when the air is cool and flows with minimal restriction and low backpressure, and the stock RS6\/RS7 intake creates genuine restrictions on a tuned engine, raising air temperature and reducing power. do88's LF-300 High-Flow Intake solves this by reducing backpressure and vacuum, letting the turbos work more efficiently.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eThe system uses a carbon fibre airbox (base and cover) paired with a BMC High Flow Air Filter, enlarged silicone hoses, and enlarged cast aluminium turbo inlets with adapter rings for either original or hybrid turbos. The result is strong power gains and a more responsive engine, alongside a genuine premium look for the engine bay.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e\u003cstrong\u003eAs an option for this intake system\u003c\/strong\u003e, do88 offers OE-style air straighteners designed to fit their turbo inlets, to their knowledge the only aftermarket supplier providing this solution. Manufactured using metal 3D printing, these straighteners introduce slightly more airflow restriction than the standard radius adapter rings included in the kit, but help preserve OE-like power characteristics across the full RPM range and improve long-term durability. Available in two sizes, for OE turbos (54mm) or popular hybrid turbos.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e\u003cstrong\u003eWorks with:\u003c\/strong\u003e OEM mounting points. Compatible with OE turbos or hybrid turbo setups via included adapter rings, or optional air straighteners.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"mt-2 -mb-1 text-base font-bold\"\u003eWhy Choose This Intake System\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCarbon fibre airbox base and cover, genuine premium engine bay finish\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eBMC High Flow Air Filter for improved filtration and airflow\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eEnlarged silicone hoses and cast aluminium turbo inlets\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eAdapter rings included for both OE and hybrid turbo compatibility\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eOptional OE-style air straighteners available, a genuinely unique offering in the aftermarket for this platform\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eReduces backpressure and vacuum for more efficient turbo operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"mt-2 -mb-1 text-base font-bold\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eAudi RS6 Avant (C8, 4.0 TFSI V8, 2020+)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eAudi RS7 Sportback (C8, 4.0 TFSI V8, 2020+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e\u003cstrong\u003eOptional air straighteners:\u003c\/strong\u003e available in two sizes, 54mm (OE turbos) or a size matched to popular hybrid turbos, sold separately.\u003c\/p\u003e","brand":"do88","offers":[{"title":"Without Air Straighteners","offer_id":54495107318093,"sku":"LF-300-S","price":2988.88,"currency_code":"EUR","in_stock":false},{"title":"OE Air Straighteners 54mm","offer_id":54495107350861,"sku":"LF-300-S-WOE","price":3104.29,"currency_code":"EUR","in_stock":false},{"title":"Hybrid Air Straighteners 60mm","offer_id":54495107383629,"sku":"LF-300-S-WTTE","price":3104.29,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/do88-audi-rs6-rs7-c8-intake-system.webp?v=1786455973"},{"product_id":"do88-audi-rs6-rs7-c8-carbon-fibre-engine-cover","title":"do88 Audi RS6\/RS7 C8 Carbon Fibre Engine Cover","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eGive your C8 RS6\/RS7 engine bay a genuine visual upgrade with this Carbon Fibre Engine Cover, a direct replacement for the factory cover that's honestly a bit bland given the performance underneath. Crafted from 2x2 twill weave prepreg carbon fibre, finished with a heat-resistant gloss clear coat for genuine durability and UV protection to prevent yellowing over time.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003eBy retaining the factory installation points and incorporating OEM-style rubber grommets, this cover is a genuine direct replacement for the factory part, requiring no modification to fit. It's a straightforward way to add a touch of \"wow\" to your engine bay, transforming the look with minimal effort and a perfect match to the aggressive character of the exterior design.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e\u003cstrong\u003eWorks with:\u003c\/strong\u003e OEM installation points and rubber grommets. Direct replacement, no modification required.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"mt-2 -mb-1 text-base font-bold\"\u003eWhy Choose This Engine Cover\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e2x2 twill weave prepreg carbon fibre construction, genuine motorsport-grade material\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eHeat-resistant gloss clear coat with UV protection to prevent yellowing\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eDirect replacement using factory installation points and OEM-style rubber grommets\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eNo modification required, straightforward installation\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eAggressive, modern aesthetic that matches the exterior styling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\" class=\"mt-2 -mb-1 text-base font-bold\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3 print:block print:space-y-1\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eAudi RS6 Avant (C8, 4.0 TFSI V8, 2020+)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eAudi RS7 Sportback (C8, 4.0 TFSI V8, 2020+)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"do88","offers":[{"title":"Default Title","offer_id":54495108202829,"sku":"MK-180","price":527.03,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/do88-audi-rs6-rs7-c8-carbon-fibre-engine-cover.webp?v=1786456126"},{"product_id":"akrapovic-audi-rs6-avant-rs7-sportback-performance-c8-opf-gpf-2023-evolution-line-titanium-exhaust-system","title":"Akrapovič Audi RS6 Avant\/RS7 Sportback Performance (C8) OPF\/GPF 2023+ Evolution Line Titanium Exhaust System","description":"\u003cp dir=\"ltr\"\u003eA full titanium Evolution Line exhaust system engineered specifically for the OPF\/GPF-equipped Audi RS6 Avant and RS7 Sportback Performance (C8), delivering genuine weight reduction alongside the deep, resonant sound this platform's twin-turbo V8 genuinely deserves. Both the RS6 Avant and RS7 Sportback Performance continue Audi's tradition of devastatingly capable, everyday-usable performance cars, and Akrapovič's system is engineered to let that V8 make its presence properly known rather than being muffled by a factory system tuned as much around noise regulations as outright character.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eComplex components, including valve housings and collectors, are cast in Akrapovič's own in-house titanium foundry, a level of manufacturing precision that's difficult to replicate with off-the-shelf mandrel-bent pipework. The system retains dual-mode valve control, offering a refined, comfortable character at cruising speeds that opens into a properly deep, sporty V8 tone under acceleration, without introducing unwanted drone during either mode. Titanium construction throughout delivers a genuine weight saving over the factory steel exhaust, a real benefit given the substantial mass these all-wheel-drive twin-turbo V8 performance cars already have to manage.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHand-crafted carbon-fibre tailpipes are included as standard, giving the rear of either car a distinctive, purposeful look that matches the drama of the sound underneath.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eOptional upgrades available:\u003c\/strong\u003e a matching Link Pipe Set (Stainless Steel), Sound Kit, and Carbon Fibre Rear Diffuser (High Gloss) are all available for this platform, sold separately, letting you further tailor the sound, flow, and styling of the complete system.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eWhy Choose This Evolution Line Exhaust System\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eFull titanium construction throughout, genuine weight reduction over the factory steel exhaust\u003c\/li\u003e\n\u003cli\u003eDeep, resonant twin-turbo V8 sound, addressing the muted factory tuning\u003c\/li\u003e\n\u003cli\u003eValve housings and collectors cast in Akrapovič's own in-house titanium foundry\u003c\/li\u003e\n\u003cli\u003eRetains dual-mode valve control, refined at cruise, properly deep and sporty under acceleration\u003c\/li\u003e\n\u003cli\u003eHand-crafted carbon-fibre tailpipes included as standard\u003c\/li\u003e\n\u003cli\u003eSpecifically engineered for OPF\/GPF-equipped models\u003c\/li\u003e\n\u003cli\u003eCompatible with the optional Link Pipe Set, Sound Kit, and matching carbon fibre diffuser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAudi RS6 Avant (C8), OPF\/GPF, 2023+\u003c\/li\u003e\n\u003cli\u003eAudi RS7 Sportback Performance (C8), OPF\/GPF, 2023+\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Akrapovič","offers":[{"title":"Default Title","offer_id":54549956264269,"sku":"S-AU\/T\/1H","price":9034.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/Akrapovic_Audi_RS6_Avant_RS7_Sportback_Performance_C8_OPF_GPF_2023_Evolution_Line_Titanium_Exhaust_System.webp?v=1787322213"},{"product_id":"akrapovic-audi-rs6-avant-rs7-sportback-performance-c8-2023-evolution-line-titanium-exhaust-system","title":"Akrapovič Audi RS6 Avant\/RS7 Sportback Performance (C8) 2023+ Evolution Line Titanium Exhaust System","description":"\u003cp dir=\"ltr\"\u003eA full titanium Evolution Line exhaust system engineered for the Audi RS6 Avant and RS7 Sportback Performance (C8), non-OPF configuration, delivering genuine weight reduction alongside the deep, resonant sound this platform's twin-turbo V8 genuinely deserves. Both the RS6 Avant and RS7 Sportback Performance continue Audi's tradition of devastatingly capable, everyday-usable performance cars, and Akrapovič's system is engineered to let that V8 make its presence properly known rather than being muffled by a factory system tuned as much around noise regulations as outright character.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eComplex components, including valve housings and collectors, are cast in Akrapovič's own in-house titanium foundry, a level of manufacturing precision that's difficult to replicate with off-the-shelf mandrel-bent pipework. The system retains dual-mode valve control, offering a refined, comfortable character at cruising speeds that opens into a properly deep, sporty V8 tone under acceleration, without introducing unwanted drone during either mode. Titanium construction throughout delivers a genuine weight saving over the factory steel exhaust, a real benefit given the substantial mass these all-wheel-drive twin-turbo V8 performance cars already have to manage.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHand-crafted carbon-fibre tailpipes are included as standard, giving the rear of either car a distinctive, purposeful look that matches the drama of the sound underneath.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e this is the non-OPF version. Confirm your exact vehicle configuration before ordering, as the OPF\/GPF-equipped version uses a separate part number (S-AU\/T\/1H).\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eOptional upgrades available:\u003c\/strong\u003e a matching Link Pipe Set (Stainless Steel), Sound Kit, and Carbon Fibre Rear Diffuser (High Gloss) are all available for this platform, sold separately, letting you further tailor the sound, flow, and styling of the complete system.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eWhy Choose This Evolution Line Exhaust System\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eFull titanium construction throughout, genuine weight reduction over the factory steel exhaust\u003c\/li\u003e\n\u003cli\u003eDeep, resonant twin-turbo V8 sound, addressing the muted factory tuning\u003c\/li\u003e\n\u003cli\u003eValve housings and collectors cast in Akrapovič's own in-house titanium foundry\u003c\/li\u003e\n\u003cli\u003eRetains dual-mode valve control, refined at cruise, properly deep and sporty under acceleration\u003c\/li\u003e\n\u003cli\u003eHand-crafted carbon-fibre tailpipes included as standard\u003c\/li\u003e\n\u003cli\u003eCompatible with the optional Link Pipe Set, Sound Kit, and matching carbon fibre diffuser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAudi RS6 Avant (C8), 2023+\u003c\/li\u003e\n\u003cli\u003eAudi RS7 Sportback Performance (C8), 2023+\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e this is the non-OPF version. The OPF\/GPF-equipped version uses a separate part number (S-AU\/T\/1H).\u003c\/p\u003e","brand":"Akrapovič","offers":[{"title":"Default Title","offer_id":54549956329805,"sku":"S-AU\/T\/2H","price":9034.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/Akrapovic_Audi_RS6_Avant_RS7_Sportback_Performance_C8_2023_Evolution_Line_Titanium_Exhaust_System.webp?v=1787322392"},{"product_id":"akrapovic-audi-rs6-avant-rs7-sportback-performance-c8-opf-gpf-2023-link-pipe-set-stainless-steel","title":"Akrapovič Audi RS6 Avant\/RS7 Sportback Performance (C8) OPF\/GPF 2023+ Link Pipe Set (Stainless Steel)","description":"\u003cp dir=\"ltr\"\u003eAkrapovič's stainless steel Link Pipe Set for the OPF\/GPF-equipped Audi RS6 Avant and RS7 Sportback Performance (C8) is designed to be paired with the matching Evolution Line (Titanium) exhaust, upgrading the system to full Evolution-spec performance. This purpose-built mid-section blends exhaust flow more effectively between the twin-turbo V8's cylinder banks, deepening the tone and adding a genuinely richer, more resonant character throughout the rev range compared to the base Evolution Line exhaust system alone.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eRather than being an afterthought accessory, this link pipe is engineered and tested alongside the rest of Akrapovič's Evolution Line system for this platform, ensuring the added mid-section genuinely complements the rear section's design instead of being bolted on as an incompatible addition. The result is a noticeably richer, more complete V8 soundtrack, particularly noticeable in the mid-range where a lot of that characterful V8 burble lives.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e this is a required companion upgrade to Akrapovič's Evolution Line exhaust for this platform, not a standalone product. Installing this link pipe typically invalidates ECE type approval and may require an ECU remap. Confirm exact requirements for your specific car before ordering, and factor this into your overall build cost and timeline.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eWhy Choose This Link Pipe Set\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGenuinely deeper, more resonant tone than the Evolution Line exhaust alone\u003c\/li\u003e\n\u003cli\u003eEngineered and tested alongside the rest of Akrapovič's Evolution Line system for this platform\u003c\/li\u003e\n\u003cli\u003eStainless steel construction for genuine long-term durability\u003c\/li\u003e\n\u003cli\u003eSpecifically matched to OPF\/GPF-equipped RS6\/RS7 models\u003c\/li\u003e\n\u003cli\u003eParticularly noticeable improvement in the mid-range V8 character\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAudi RS6 Avant (C8), OPF\/GPF, 2023+\u003c\/li\u003e\n\u003cli\u003eAudi RS7 Sportback Performance (C8), OPF\/GPF, 2023+\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e Akrapovič's Evolution Line (Titanium) exhaust system for this platform (S-AU\/T\/1H), sold separately, this link pipe is not a standalone product.\u003c\/p\u003e","brand":"Akrapovič","offers":[{"title":"Default Title","offer_id":54549956362573,"sku":"L-AU\/SS\/8\/1","price":1954.47,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/Akrapovic_Audi_RS6_Avant_RS7_Sportback_Performance_C8_OPF_GPF_2023_Link_Pipe_Set_Stainless_Steel.webp?v=1787323331"},{"product_id":"akrapovic-audi-rs6-avant-rs7-sportback-performance-c8-opf-gpf-2023-2024-sound-kit","title":"Akrapovič Audi RS6 Avant\/RS7 Sportback Performance (C8) OPF\/GPF 2023-2024 Sound Kit","description":"\u003cp dir=\"ltr\"\u003eThe optional Akrapovič Sound Kit gives owners of the OPF\/GPF-equipped Audi RS6 Avant and RS7 Sportback Performance (C8) genuine, direct control over the sound of their exhaust system from the cockpit. Rather than being locked into whatever character the car's drive mode happens to dictate, this kit puts that decision back in your hands, letting you switch between a quiet, more restrained mode and a genuinely sportier, more dynamic V8 note on demand, whenever and wherever suits you.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAt the core of the system is a receiver, already integrated as part of the Evolution system, which drives the actuators responsible for physically opening or closing the valves at the end of the exhaust. You can regulate these valves in two ways: through Akrapovič's dedicated Sound Remote Controller, a simple, purpose-built hardware unit, or through their smartphone app, available for both iOS and Android, giving you genuinely flexible, on-the-fly control without needing a separate physical remote rattling around in the car.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis is a genuinely popular addition for RS6\/RS7 owners who want the fullest expression of that twin-turbo V8 character for weekend or spirited driving, while still being able to dial things back to something more neighbour-friendly for the daily commute or a long motorway drive with passengers or cargo aboard.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e using this optional Sound Kit invalidates ECE type approval for the exhaust system it's fitted to. If retaining road-legal type approval matters for your specific market or use case, this is worth weighing carefully against the genuine convenience and flexibility the kit provides.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eWhy Choose This Sound Kit\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGenuine cockpit control over exhaust sound, entirely independent of the car's drive mode\u003c\/li\u003e\n\u003cli\u003eSwitch between a quiet, restrained mode and a sportier, more dynamic V8 sound whenever you choose\u003c\/li\u003e\n\u003cli\u003eControl via Akrapovič's dedicated Sound Remote Controller or their smartphone app (iOS\/Android)\u003c\/li\u003e\n\u003cli\u003eSpecifically matched to OPF\/GPF-equipped RS6\/RS7 models, 2023-2024\u003c\/li\u003e\n\u003cli\u003eReceiver already included as part of the Evolution system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAudi RS6 Avant (C8), OPF\/GPF, 2023-2024\u003c\/li\u003e\n\u003cli\u003eAudi RS7 Sportback Performance (C8), OPF\/GPF, 2023-2024\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e an existing Akrapovič exhaust system with Evolution valve actuators fitted (Evolution Line Titanium and\/or Link Pipe Set), sold separately.\u003c\/p\u003e","brand":"Akrapovič","offers":[{"title":"Default Title","offer_id":54549956428109,"sku":"P-HF1282","price":586.71,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/Akrapovic_Audi_RS6_Avant_RS7_Sportback_Performance_C8_OPF_GPF_2023-2024_Sound_Kit.webp?v=1787323501"},{"product_id":"akrapovic-audi-rs6-avant-rs7-sportback-performance-c8-opf-gpf-2023-2024-carbon-fibre-rear-diffuser-high-gloss","title":"Akrapovič Audi RS6 Avant\/RS7 Sportback Performance (C8) OPF\/GPF 2023-2024 Carbon Fibre Rear Diffuser (High Gloss)","description":"\u003cp dir=\"ltr\"\u003eHand-crafted carbon fibre rear diffuser for the OPF\/GPF-equipped Audi RS6 Avant and RS7 Sportback Performance (C8), produced in-house by Akrapovič's skilled technicians to show off the tailpipes of the matching Akrapovič Evolution Line exhaust at their absolute best. It's a completely new design from the one that comes standard on the car, giving the rear of either car a genuinely more aggressive, sporty feel, whether you're pairing it with the RS6's practical estate silhouette or the RS7's sleeker Sportback profile.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis is the high gloss finish option, a genuinely lightweight accessory that contributes to overall weight reduction rather than adding meaningless mass purely for the sake of styling. The carbon fibre construction is finished to a showroom-quality standard, with attention paid to matching the factory panel gaps and mounting points so the diffuser integrates seamlessly with the rest of the rear bumper rather than looking like an aftermarket bolt-on.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWhether you're pairing this with Akrapovič's own Evolution Line exhaust system for a complete, cohesive rear-end transformation, or simply adding it as a standalone styling upgrade to a car that's otherwise stock, this diffuser is engineered to genuinely elevate the RS6 or RS7's rear presence rather than just adding visual clutter.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eWhy Choose This Rear Diffuser\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eHand-crafted, in-house produced carbon fibre construction\u003c\/li\u003e\n\u003cli\u003eGenuinely lightweight, contributes to overall weight reduction rather than adding unnecessary mass\u003c\/li\u003e\n\u003cli\u003eCompletely new design, more aggressive rear styling than the factory unit\u003c\/li\u003e\n\u003cli\u003eDesigned to show off the Akrapovič Evolution Line (Titanium) exhaust tailpipes at their best\u003c\/li\u003e\n\u003cli\u003eShowroom-quality finish, matched to factory panel gaps and mounting points\u003c\/li\u003e\n\u003cli\u003eFits both the RS6 Avant and RS7 Sportback body styles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAudi RS6 Avant (C8)\u003c\/li\u003e\n\u003cli\u003eAudi RS7 Sportback Performance (C8)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Akrapovič","offers":[{"title":"Default Title","offer_id":54549956460877,"sku":"DI-AU\/CA\/1\/G","price":3151.26,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/Akrapovic_Audi_RS6_Avant_RS7_Sportback_Performance_C8_OPF_GPF_2023-2024_Carbon_Fibre_Rear_Diffuser_High_Gloss.webp?v=1787323639"},{"product_id":"milltek-sport-audi-rs4-b9-rs5-b9-rs6-c8-rs7-c8-active-valve-control","title":"Milltek Sport Audi RS4 B9 \/ RS5 B9 \/ RS6 C8 \/ RS7 C8 Active Valve Control","description":"\u003cp dir=\"ltr\"\u003eMilltek Sport's Active Valve Control system for the Audi RS4 (B9), RS5 (B9), RS6 (C8), and RS7 (C8) gives you genuine, direct control over the exhaust valve behaviour from inside the cabin, independent of the car's factory drive mode settings. Switch between a quieter, more restrained setting for early mornings or long motorway drives, and a fuller, more purposeful sound on demand, letting the twin-turbo V6 or V8 across this range make its presence known exactly when you want it to.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis is a genuinely popular addition for owners who want flexibility, sportier sound when you want it, without being locked into one setting permanently or needing to compromise on everyday usability. Whether you're pulling out of a quiet residential street early in the morning or opening things up on a spirited weekend drive, this system puts that decision back in your hands rather than leaving it tied to whichever drive mode the car happens to be in.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e confirm exact cross-platform fitment with your supplier before publishing, as this same part number spans four genuinely different models (RS4, RS5, RS6, RS7) across two chassis generations.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eWhy Choose This Active Valve Control\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGenuine cockpit control over exhaust valve behaviour, entirely independent of the car's drive mode\u003c\/li\u003e\n\u003cli\u003eSwitch between a quieter, restrained setting and a fuller, more purposeful sound on demand\u003c\/li\u003e\n\u003cli\u003eShared fitment across the RS4\/RS5 B9 and RS6\/RS7 C8 range\u003c\/li\u003e\n\u003cli\u003eGenuinely useful for balancing daily-driver civility with weekend driving character\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAudi RS4 (B9)\u003c\/li\u003e\n\u003cli\u003eAudi RS5 (B9)\u003c\/li\u003e\n\u003cli\u003eAudi RS6 (C8)\u003c\/li\u003e\n\u003cli\u003eAudi RS7 (C8)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milltek Sport","offers":[{"title":"Default Title","offer_id":54638951891277,"sku":"SSXAU1052","price":557.05,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/Milltek_Sport_Audi_RS4_B9_RS5_B9_RS6_C8_RS7_C8_Active_Valve_Control.webp?v=1788465212"},{"product_id":"milltek-sport-audi-rs6-rs7-c8-4-0-v8-bi-turbo-opf-gpf-gpf-back-exhaust-system","title":"Milltek Sport Audi RS6\/RS7 C8 4.0 V8 Bi-Turbo (OPF\/GPF) GPF-Back Exhaust System","description":"\u003cp dir=\"ltr\"\u003eMilltek Sport's GPF-back exhaust for the Audi RS6\/RS7 C8 4.0 V8 Bi-Turbo, OPF\/GPF Models, replaces everything from the gasoline particulate filter rearward, engineered to deliver genuine gains in flow, sound, and weight over the factory system while retaining the OPF\/GPF unit itself for continued emissions compliance. Constructed from T-304 stainless steel throughout, this system is built to outlast the car itself, resisting the corrosion that eventually catches up with mild steel factory systems.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMilltek's own sound engineers spend considerable time tuning each system's resonance and tone, striking a genuine balance between a purposeful, sporting character and everyday drivability, avoiding the drone that can plague poorly engineered aftermarket systems on a long motorway drive. Because this system works around the retained OPF\/GPF unit, it's specifically engineered to deliver a genuine performance and sound upgrade while keeping the particulate filter's emissions function intact.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease select your exhaust tip finish at checkout:\u003c\/strong\u003e Twin 80mm Cerakote Black Oval or Twin 80mm Polished Oval. Both options deliver identical performance and sound characteristics, purely a styling choice.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eWhy Choose This GPF-Back Exhaust\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGenuine gains in flow, sound, and weight over the factory system\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel construction throughout, built to outlast the factory system\u003c\/li\u003e\n\u003cli\u003eRetains the OPF\/GPF unit for continued emissions compliance\u003c\/li\u003e\n\u003cli\u003eDistinctive twin 80mm oval tailpipes in a choice of two finishes\u003c\/li\u003e\n\u003cli\u003eMilltek's own sound engineering, avoiding unwanted drone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAudi RS6 (C8) 4.0 V8 Bi-Turbo, OPF\/GPF Models\u003c\/li\u003e\n\u003cli\u003eAudi RS7 (C8) 4.0 V8 Bi-Turbo, OPF\/GPF Models\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milltek Sport","offers":[{"title":"Twin 80mm Cerakote Black Oval","offer_id":54682979729741,"sku":"SSXAU865","price":6041.96,"currency_code":"EUR","in_stock":false},{"title":"Twin 80mm Polished Oval","offer_id":54682979762509,"sku":"SSXAU864","price":5903.35,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/Milltek_Sport_Audi_RS6_RS7_C8_4.0_V8_Bi-Turbo_OPF_GPF_GPF-Back_Exhaust_System.webp?v=1788853945"},{"product_id":"milltek-sport-audi-rs6-rs7-c8-4-0-v8-bi-turbo-opf-gpf-large-bore-downpipes-and-hi-flow-sports-cats","title":"Milltek Sport Audi RS6\/RS7 C8 4.0 V8 Bi-Turbo (OPF\/GPF) Large Bore Downpipes and Hi-Flow Sports Cats","description":"\u003cp dir=\"ltr\"\u003eMilltek Sport's Large Bore Downpipes and Hi-Flow Sports Cats for the Audi RS6\/RS7 C8 4.0 V8 Bi-Turbo, OPF\/GPF Models, combine two upgrades in one package, genuinely larger-diameter downpipes paired with higher-flow metal substrate cats, replacing the factory catalytic converters with something that flows considerably better while still retaining meaningful emissions control. This is a sensible middle-ground option for owners wanting a substantial flow improvement without going the full de-cat route.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eConstructed from T-304 stainless steel throughout, this system is built to outlast the factory components it replaces, resisting the corrosion that eventually catches up with mild steel factory parts. Reducing backpressure across both the downpipe and catalytic converter sections at once delivers a more complete performance upgrade than addressing either section individually, particularly noticeable when paired with a supporting ECU tune.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eWhy Choose These Downpipes and Hi-Flow Sports Cats\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eCombines larger-bore downpipes with higher-flow sports cats in one package\u003c\/li\u003e\n\u003cli\u003eRetains meaningful catalytic converter function, unlike a full de-cat pipe\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel construction throughout, built for long-term durability\u003c\/li\u003e\n\u003cli\u003eParticularly effective when paired with a supporting ECU tune\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAudi RS6 (C8) 4.0 V8 Bi-Turbo, OPF\/GPF Models\u003c\/li\u003e\n\u003cli\u003eAudi RS7 (C8) 4.0 V8 Bi-Turbo, OPF\/GPF Models\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milltek Sport","offers":[{"title":"Default Title","offer_id":54682979991885,"sku":"SSXAU868","price":5985.03,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/Milltek_Sport_Audi_RS6_RS7_C8_4.0_V8_Bi-Turbo_OPF_GPF_Large_Bore_Downpipes_and_Hi-Flow_Sports_Cats.webp?v=1788854232"},{"product_id":"milltek-sport-audi-rs6-rs7-c8-4-0-v8-bi-turbo-opf-gpf-front-pipe-back-exhaust-system","title":"Milltek Sport Audi RS6\/RS7 C8 4.0 V8 Bi-Turbo (OPF\/GPF) Front Pipe-Back Exhaust System","description":"\u003cp dir=\"ltr\"\u003eMilltek Sport's Front Pipe-Back exhaust for the Audi RS6\/RS7 C8 4.0 V8 Bi-Turbo, OPF\/GPF Models, replaces everything from the front pipe rearward, a more comprehensive upgrade than a standard cat-back, delivering genuine gains in flow, sound, and weight over the factory system. Constructed from T-304 stainless steel throughout, this system is built to outlast the car itself, resisting the corrosion that eventually catches up with mild steel factory systems.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eMilltek's own sound engineers spend considerable time tuning each system's resonance and tone, striking a genuine balance between a purposeful, sporting character and everyday drivability, avoiding the drone that can plague poorly engineered aftermarket systems on a long motorway drive. Because this system extends further upstream than a standard cat-back, it addresses a genuinely larger section of the exhaust for owners chasing every bit of flow and character this twin-turbo V8 is capable of.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease select your exhaust tip finish at checkout:\u003c\/strong\u003e Twin 80mm Cerakote Black Oval or Twin 80mm Polished Tips. Both options deliver identical performance and sound characteristics, purely a styling choice.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eWhy Choose This Front Pipe-Back Exhaust\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eMore comprehensive upgrade than a standard cat-back, replacing everything from the front pipe rearward\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel construction throughout, built to outlast the factory system\u003c\/li\u003e\n\u003cli\u003eDistinctive twin 80mm oval tailpipes in a choice of two finishes\u003c\/li\u003e\n\u003cli\u003eMilltek's own sound engineering, avoiding unwanted drone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAudi RS6 (C8) 4.0 V8 Bi-Turbo, OPF\/GPF Models\u003c\/li\u003e\n\u003cli\u003eAudi RS7 (C8) 4.0 V8 Bi-Turbo, OPF\/GPF Models\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milltek Sport","offers":[{"title":"Twin 80mm Cerakote Black Oval","offer_id":54682980417869,"sku":"SSXAU863","price":5390.99,"currency_code":"EUR","in_stock":false},{"title":"Twin 80mm Polished Tips","offer_id":54682980450637,"sku":"SSXAU862","price":5252.37,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/Milltek_Sport_Audi_RS6_RS7_C8_4.0_V8_Bi-Turbo_OPF_GPF_Front_Pipe-Back_Exhaust_System.webp?v=1788855027"},{"product_id":"milltek-sport-audi-rsq8-4-0-v8-bi-turbo-opf-gpf-2020-2025-active-valve-control","title":"Milltek Sport Audi RSQ8 4.0 V8 Bi-Turbo (OPF\/GPF) 2020-2025 Active Valve Control","description":"\u003cp dir=\"ltr\"\u003eMilltek Sport's Active Valve Control system for the OPF\/GPF-equipped Audi RSQ8 4.0 V8 Bi-Turbo, 2020-2025, gives you genuine, direct control over the exhaust valve behaviour from inside the cabin, independent of the car's factory drive mode settings. Switch between a quieter, more restrained setting for early mornings or long motorway drives, and a fuller, more purposeful sound on demand, letting the twin-turbo V8 make its presence known exactly when you want it to.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThis is a genuinely popular addition for owners who want flexibility, sportier sound when you want it, without being locked into one setting permanently or needing to compromise on everyday usability. Whether you're pulling out of a quiet residential street early in the morning or opening things up on a spirited weekend drive, this system puts that decision back in your hands rather than leaving it tied to whichever drive mode the car happens to be in.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this same SKU was also given earlier for RS4\/RS5 (B9) and RS6\/RS7 (C8) Active Valve Control at an identical price. Confirm with your supplier whether this is genuinely a shared part across these Audi platforms before publishing, since RSQ8 and these smaller RS models don't typically share the exact same exhaust valve hardware.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eWhy Choose This Active Valve Control\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGenuine cockpit control over exhaust valve behaviour, entirely independent of the car's drive mode\u003c\/li\u003e\n\u003cli\u003eSwitch between a quieter, restrained setting and a fuller, more purposeful sound on demand\u003c\/li\u003e\n\u003cli\u003eLets the twin-turbo V8 make its presence known exactly when you want it to\u003c\/li\u003e\n\u003cli\u003eGenuinely useful for balancing daily-driver civility with weekend driving character\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAudi RSQ8 4.0 V8 Bi-Turbo, OPF\/GPF Equipped Models, 2020-2025\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milltek Sport","offers":[{"title":"Default Title","offer_id":54682980712781,"sku":"SSXAU1052","price":557.05,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/Milltek_Sport_Audi_RSQ8_4.0_V8_Bi-Turbo_OPF_GPF_2020-2025_Active_Valve_Control.webp?v=1788855653"},{"product_id":"milltek-sport-audi-rs6-rs7-c8-4-0-v8-bi-turbo-opf-gpf-large-bore-downpipes-and-cat-bypass-pipes","title":"Milltek Sport Audi RS6\/RS7 C8 4.0 V8 Bi-Turbo (OPF\/GPF) Large-Bore Downpipes and Cat Bypass Pipes","description":"\u003cp dir=\"ltr\"\u003eMilltek Sport's Large-Bore Downpipes and Cat Bypass Pipes for the Audi RS6\/RS7 C8 4.0 V8 Bi-Turbo, OPF\/GPF Models, replace the factory downpipes and catalytic converters with a genuinely larger-diameter, straight-through design, constructed from T-304 stainless steel throughout for long-term durability. This combination targets two of the most restrictive points in the factory exhaust system at once, delivering a substantial flow improvement over addressing either section individually.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eReducing backpressure at both the downpipe and catalytic converter stages simultaneously typically delivers one of the most noticeable power and response gains available on this twin-turbo V8 platform, particularly when paired with a supporting ECU tune. Intended primarily for track and off-road use, worth checking local emissions regulations before fitting to a road car, since removing catalytic converter function entirely will affect emissions compliance in most regions.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease select your fitment at checkout:\u003c\/strong\u003e Fits to OE System or Fits to Milltek Sport System, depending on whether you're retaining the factory exhaust downstream or already running a Milltek system.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eWhy Choose These Downpipes and Cat Bypass Pipes\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGenuinely larger diameter than the factory downpipes, reducing backpressure throughout\u003c\/li\u003e\n\u003cli\u003eTargets both the downpipe and catalytic converter restriction points at once\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel construction, built for long-term durability\u003c\/li\u003e\n\u003cli\u003eAvailable matched to either OE or Milltek Sport downstream systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003eCompatibility\u003c\/h2\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAudi RS6 (C8) 4.0 V8 Bi-Turbo, OPF\/GPF Models\u003c\/li\u003e\n\u003cli\u003eAudi RS7 (C8) 4.0 V8 Bi-Turbo, OPF\/GPF Models\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milltek Sport","offers":[{"title":"Fits to OE System","offer_id":54701663158605,"sku":"SSXAU871","price":3733.84,"currency_code":"EUR","in_stock":false},{"title":"Fits to Milltek Sport System","offer_id":54701663191373,"sku":"SSXAU870","price":3754.88,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/4808\/2253\/files\/Milltek_Sport_Audi_RS6_RS7_C8_4.0_V8_Bi-Turbo_OPF_GPF_Large-Bore_Downpipes_and_Cat_Bypass_Pipes_1.webp?v=1789026551"}],"url":"https:\/\/i6tuning.com\/collections\/rs6-c8-2019-2025.oembed","provider":"i6 Tuning","version":"1.0","type":"link"}